Extruded Profile Catalog

Structural Profile, 6061 Series

High-strength extruded aluminum profile designed for rigid assemblies, frames, and load-bearing industrial structures.

Architectural Profile, 6063 Series

Architectural-grade profile with a clean surface finish, suitable for visible systems and decorative finishes.

Heat Sink Profile

Finned aluminum profile engineered to increase heat-transfer area and support passive thermal management.

Trailer Flooring Planks

Interlocking aluminum plank with the strength and low weight required for demanding transportation environments.

Pneumatic Cylinder Tubes

Precision extruded tube intended for pneumatic cylinders that require consistent geometry and controlled inner diameters.

Solar Panel Mounting Rails

Lightweight, corrosion-resistant rail profile designed to simplify photovoltaic module support and installation.

Industrial profile 30 × 30 mm — 31696

Part number: 31696

Industrial profile 30 × 30 mm — 31696. Part number 31696, aluminum alloy 6063 and temper T6. Square cross-section with four open slots, corner chambers and a hollow, lobed central core. Consult the downloadable drawing for complete dimensions and tolerances.

Industrial profile 40 × 40 mm — 30460

Part number: 30460

Industrial profile 40 × 40 mm — 30460. Part number 30460, aluminum alloy 6063 and temper T5. Square cross-section with slots on all four faces, internal corner chambers and a circular central bore. Consult the downloadable drawing for complete dimensions and tolerances.

Industrial profile 40 × 40 mm — 32847

Part number: 32847

Industrial profile 40 × 40 mm — 32847. Part number 32847, aluminum alloy 6063 and temper T5. Slotted square cross-section with rounded corner chambers and a hollow, contoured central core. The drawing notes extrusion key 32829. Consult the downloadable drawing for complete dimensions and tolerances.

Industrial profile 30 × 30 mm — 32842

Part number: 32842

Industrial profile 30 × 30 mm — 32842. Part number 32842, aluminum alloy 6063 and temper T5. 30 mm square cross-section with four slots, corner chambers and a hollow, lobed central core. The drawing notes extrusion key 32823. Consult the downloadable drawing for complete dimensions and tolerances.

Structural profile 45 × 45 mm — 32422

Part number: 32422

Structural profile 45 × 45 mm — 32422. Part number 32422, aluminum alloy 6063 and temper T5. Structural square cross-section with four slots, hollow corner chambers and an internally grooved central cavity. Consult the downloadable drawing for complete dimensions and tolerances.

Industrial profile 40 × 40 mm — 32195

Part number: 32195

Industrial profile 40 × 40 mm — 32195. Part number 32195, aluminum alloy 6063 and temper T5. Slotted square cross-section with corner chambers and a circular central bore measuring 7 mm, as dimensioned in the drawing. Consult the downloadable drawing for complete dimensions and tolerances.

Industrial profile 45 × 45 mm — 32194

Part number: 32194

Industrial profile 45 × 45 mm — 32194. Part number 32194, aluminum alloy 6063 and temper T5. 45 mm square cross-section with four slots and an internally grooved central cavity. The drawing specifies a uniform 1.4 mm wall thickness unless otherwise noted. Consult the downloadable drawing for complete dimensions and tolerances.

Industrial profile 45 × 45 mm — 32192

Part number: 32192

Industrial profile 45 × 45 mm — 32192. Part number 32192, aluminum alloy 6063 and temper T6. 45 mm square cross-section with four slots, corner chambers and a grooved central cavity. The drawing specifies a uniform 1.8 mm wall thickness unless otherwise noted. Consult the downloadable drawing for complete dimensions and tolerances.